Technical
Technical Specification
Data given below are tested by solo ceramic quality control department bt yhe use of company's standard testing method.
| Sr.No. | Particulars | I.S.I Requirements | Our Value |
| 01 | Water Absorption | 0.50% | <0.20% |
| 02 | Modulus of Rupture(Breaking Strength) | 600 KG/SQ.CM | 650 TO 700 KG./SQ.CM |
| 03 | Crazing Resistance (Steam Pressure of 3.7 KG/SQ.CM for 4 HRS.) | NO Crazing upto 2 Cycles | NO Crazing upto 4 Cycles |
| 04 | Minimum Thickness | Should be Mini. 6.0 mm at any Place | Mini. 7 mm at Any Place |
| 05 | Warpage | The Appliance should not show Warpage More Than The Specified Limits | Warpage Well Within The Permissible Limits |
| 06 | Thickness of Glaze at any Place | Not Specified | Mini. 400 Microns that is 0.4 mm |
| 07 | Surface Quality | No Wavy Finish on the visible surface | No Wavy Finish |
| 08 | Discolouration | None on the visible surface | on the visible surface |
| 09 | Resistance to Chemicals | Should be Resistant to all House hold Chemicals | Passes |
| 10 | Resistance to Stains and Burn | No Stains should remain on Testing | Passes |